You probably don’t have much time for test operations these days. However, during commissioning, you need to determine whether all systems work together optimally. To ensure that everything runs as it should, we offer practical tools and customised support, from installation and configuration to parameterisation and training your operating staff.
Do you need to reduce the workload of your staff and want help with commissioning our products and solutions? Our local service specialists are available worldwide to assist you with on-site assembly, installation and commissioning.
Our commissioning service includes:
Simply order the commissioning service with the relevant product or contact us.
Make the most of the performance of your system – our service technicians will take over the commissioning of axis systems on-site and thus enable fast, reliable and optimally coordinated operation. The commissioning service is available for one-, two- and three-axis systems with and without a safety module.
Tools and resources are available directly from Festo for each product in the online selection, including operating instructions, assembly instructions, manuals and, of course, the matching software. The easiest way to find what you're looking for is with the part number or order code.
Parameterise, program and service a complete drive system, from the mechanical system to the controller, with just a few clicks – and all in just one software package. You can get straight to work because the user interface is extremely intuitive and all of the basic functionalities of all Festo components is already installed.
The Automation Suite can also be configured to meet your individual requirements. To do this, simply install plug-ins and extensions directly from the software.
The Festo Configuration Tool (FCT) provides a clear overview of all the drives in a system. With our configuration and commissioning software, you can move axis systems step by step or in sequences, write individual records for the positioning set table using the teach-in method and apply trace functions. FCT runs offline in the office as well as online directly on the machine for parameterising positioning options and for diagnostics.
Product-specific plug-ins can be found on the relevant product detail page under ‘Downloads and media’ in the Software section. Enter the part number or order code in the search field or navigate to the right page via the product selection.
The easiest way to commission, configure and carry out extended diagnostics of CPX valve terminals is with the CPX-FMT. If you are using an industrial Ethernet fieldbus node such as EtherNet/IP, PROFINET and Modbus®/TCP, the Maintenance Tool communicates directly with the CPX terminal. With conventional fieldbuses, the software can be connected to the CPX terminal via a USB adapter (type NEFC-M12G5-0,3-U1G5).
The Festo Field Device Tool is like a Swiss army knife for service and commissioning: a practical software tool that provides various functions for all Ethernet-based field devices from Festo, including CPX control blocks with associated valve terminals, CECC controllers and motor controllers, as well as for camera systems. It enables you to find all Festo devices in the network and then easily and conveniently check and update the firmware.
It’s important to be organised, and, with the help of these digital templates, you can easily create precisely fitting labels for valve terminals. There are separate Word files for the label holders for the CPV, CPX and MPA series.
Drilling templates for CPX, MPA, VTSA and VTSA-F series valve terminals can be found in the expert knowledge for each product.