List of approved components for Audi Neckarsulm – assembly line
A list of approved components was created together with Audi in Neckarsulm. It contains all the Festo products that can be used in the assembly line at the Neckarsulm plant.
The technical assembly department at Audi is the point of contact for the Audi NSU assembly list of approved Festo mechanical components. A copy of the list can be obtained from this department.
List of approved components for engine production at Audi’s Györ and Ingolstadt plants
The VW lists of approved components for component production applies to component production in the Györ and Ingolstadt plants.
Further information and documents can be found here:
Product data sheets for the Audi list of approved electric components
The product data sheets have been created based on the Audi AG list of approved electric components.
These data sheets apply to automation technology in the body shop, paint shop and assembly line at the plants in Ingolstadt, Neckarsulm and Brussels.
If you have any queries, please get in touch with your contact person at Festo:
List of approved components for Autoliv Vårgårda – Sweden
The list of approved components contains all components approved for Autoliv projects with links to documents and other information in the Festo catalogue.
Festo is proud to be a Best Practice Partner for all global BMW projects.
The BMW technology areas and Festo have therefore jointly created globally valid lists of approved components and project books for standardisation in order to support general contractors, system and machine partners (SE partners) when selecting suitable and approved products.
Body shop (TKB)
Globally valid list of approved components to BMW standard V7, V8x for the body shop technology area:
VTSA-F-FB valve terminal configurator according to BMW standard V7, V8x for the body shop technology area:
List of approved components for the assembly technology area for the BMW plants. Munich, Dingolfing, Regensburg, Leipzig (Germany), Araquari (Brazil), Oxford (Great Britain), Spartanburg (United States), Rosslyn (South Africa), Shenyang (China), and San Luis Potosí (Mexico) plants.
Powertrain (TA-, MT-5x)
List of approved components for the powertrain technology area for the BMW plants: Munich, Dingolfing, Landshut, Regensburg, Berlin, Leipzig (Germany) as well as Steyr (Austria), Hams Hall (Great Britain) and Shenyang (China).
Project participants receive information about the latest projects and regulations on the corresponding digital B2B platforms of the BMW Group.
Special approvals are possible in exceptional cases in consultation with the BMW project manager.
Worldwide list of approved Festo components for Brose plants
The list of approved components contains all the generally approved components and configurations for pneumatic and electric automation technology.
Special approvals are possible in exceptional cases in consultation with the project manager at Brose.
Scope of validity: worldwide for all Brose locations
The specification is used for all new purchases, conversions and extensions.
CNH-FPT Industrial project book
CNH-FPT INDUSTRIAL and Festo have created a global project book for powertrain projects to help machine and system builders to select suitable and approved products.
Both the specifications of CNH-FPT INDUSTRIAL and the global standards have been taken into account.
The Festo project book complements CNH-FPT INDUSTRIAL's specifications and specifies the components that can be used to build machines and systems within the scope of powertrain projects.
List of approved components for DAF
Together with DAF Eindhoven, we created a list of approved standard components. It contains all the approved Festo products for automation in the body shop, the paint shop, final assembly and engine production in Eindhoven (NL) and Westerlo (BE). The approval of components not included on this list is subject to consultation with the respective DAF N.V. engineers.
Festo is a project partner of Daimler in the INTEGRA 5 and INTEGRA 6 standardisation lines in their car body plants worldwide. Daimler and Festo have created joint global project books for the INTEGRA standardisation lines and the powertrain in order to help system and machine builders to select suitable and approved products.
Project participants receive information about the latest projects and regulations on the corresponding digital platforms from Daimler:
That is also where you can find all the latest lists of approved components, project books and valve terminal configurators from Festo. The lists of approved components and project books specify the components that can be used in the individual projects for building the specific machines and systems.
If you have any further questions, please contact:
Project books for FCA powertrain projects
FCA and Festo have created joint global project books for powertrain projects in order to help system and machine builders to select suitable and approved products.
Both the specifications of FCA and the global standards have been taken into account.
The Festo project book for FCA powertrain projects complements FCA’s specifications and defines the components that can be used to build machines and systems within the scope of powertrain projects.
Project book for FCA powertrain projects in Europe, Latin America and Asia:
Project book for FCA powertrain projects in North America (NAFTA):
The Ford Motor Company is one of the largest car manufacturers in the world and is one of Festo’s most important customers. The size and global presence of Ford has led Festo to set up a Ford Customer Team that will support all Ford plants worldwide as well as the machine and system builders during projects.
Ford Customer Team
If you have any questions about current Ford projects or other matters, please contact James Orolim ( email@example.com ).
For most Ford projects, Festo has created project books that describe the current status of approved components. In addition, the project books provide help for planners and engineers when designing new machines and systems for the Ford Motor Company.
Valencia plant (Spain) – Project CX482 (Kuga)
Body shop: Valencia – component list (PDF)
Craiova plant (Romania) – Project BX726 (B-CUV)
Body shop: Craiova – component list (PDF)
Cologne and Saarlouis plant – Projects B479 (Fiesta) and C519 (Focus)
Body shop: Cologne and Saarlouis – component list (PDF)
Thailand, South Africa and South America plant – Projects P703 and U704
Approved component list Next Gen 3.2 IMG
Ford final assembly
Project book for final assembly
Global powertrain specification
Festo is the preferred component manufacturer for all Ford global powertrain projects. The global list of approved components for Ford powertrain projects is available on the Ford Covisint platform. You can also download the Festo project book there.
Global Powertrain Spec (copy has not been checked!)
If you have any other questions or require support, please contact the Ford Customer Team at Festo.
General Motors operates two joint ventures in China.
1. SAIC General Motors Corporation Limited (SAIC-GM or "SGM")
2. SAIC General Motors-Wuling (SAIC-GM-Wuling or “SGMW”)
SAIC General Motors-Wuling (SAIC-GM-Wuling or “SGMW”) SAIC-GM-Wuling is a joint venture between SAIC Motor, General Motors and Liuzhou Wuling Motors Co Ltd that produces commercial and private vehicles sold in China under the brands Wuling and Baojun. SGMW is a major manufacturer of mass-produced products in the domestic Chinese market and one of the largest manufacturers of microvans in China.
List of preferred products for Magna Powertrain ILZ
This preferred product list was created in cooperation with Magna Powertrain ILZ. The approvals apply to the ILZ plant.
Preferred product list for Magna Steyr for the G30, X 540, X 590, MOPF, GJ29 projects
This preferred product list was created in cooperation with Magna Steyr Fahrzeugtechnik Graz for the body shop. The approvals apply to the body shop at the Graz plant for the G30, X 540, X 590, MOPF, and GJ29 projects as well as subsequent projects.
In addition, there are two configurators for the valve terminal type 45 (CPX-VTSA-F) (1x bus node FB44 Profinet RJ45 for new systems with TIA Portal, 1x bus node FB45 SCRJ for integration in S7 systems) which make it easier for you to configure the valve terminal (version 1.4).
List of approved components for engine production by MAN Truck & Bus in Nuremberg (production department)
You can find the list of approved components for projects for the MAN Truck & Bus engine plant in Nuremberg, including links and other relevant information, here.
Porsche Zuffenhausen project PO68x, PO51x, PO45x (body in white)
Porsche Leipzig project PO62x, PO63x, PO42x (body in white)
A list of approved components and a valve terminal configurator are available for these projects. These documents are available on request.
If you have any further questions, please contact: Helmo Kästner (firstname.lastname@example.org)
Have you worked for the Renault Group?
Festo has worked closely with Renault to identify the right components for the pneumatics and for the motion controllers for electric drives based on the specified Renault requirements:
Please ask your local contact at Festo, who will assist you by preparing an offer or help you with project engineering.
Quickly finding the right option saves money.
As part of the Renault project, Festo supports all Renault teams and Renault partnerships with the production of the RFQ/Engineering with the "Global overview", as well as with the "Document of synthesis for Renault project", which was produced specially for the current Renault project.
Please see the "Global overview..." for your contact at Festo in order to obtain the "Document of synthesis for Renault project XXX".
Many applications that have already been carried out with Renault are standardised, such as air unit panels or e-drive applications, in order to reduce the development time and the risks in your project. Don’t hesitate – call Festo now.
As a part of the TRATON Group (formerly Volkswagen Truck & Bus), SCANIA is one of Festo’s key global customers. SCANIA manufactures heavy trucks and buses at its main locations in Europe and South America. Festo supports SCANIA AB globally with its SCANIA Customer Team, both at its local plants and with new projects.
SCANIA Customer Team
For questions about ongoing SCANIA projects or other topics, please get in touch with your Festo contacts.
Festo has created project books for SCANIA projects. These project books contain information on the current specification status and other additional functions that may be of help when designing systems for SCANIA AB.
SCANIA Oskarsham (SE) and SCANIA Sao Bernardo (BR)
Cab production: Scania CV specification BiW (PDF in English)
SCANIA New Foundry Södertälje
A project book has been created for the "New Foundry" project in Södertälje: Project book "New Foundry"
VW list of approved components for component production
These lists of approved components were created in cooperation with Audi, Skoda and Volkswagen and are based on the up-to-date specifications for mechanical systems for component production of the Volkswagen Group.
Click here to download the circuit diagrams for the service modules (see Section 3.6.11 in the list of approved components).
VW list of approved components BV 1.13 body shop
Volkswagen Hanover: service modules in the press shop
A number of service modules have been defined and approved in collaboration with the press shop at the Volkswagen plant in Hanover.
If you have any queries, please get in touch with your contact person at Festo:
List of approved components for Volvo Cars AB, Motorenwerke
The list of approved components for all Volvo Cars AB, engine plants with links to documentation, CAD data and all other information from the Festo catalogue can be found here.
This list of approved components applies to projects at the Skövde and Floby plants and encompasses all products from Festo that are approved for use in Volvo Cars plants in Sweden.
List of approved components for Volvo Cars worldwide
Please contact Festo for the latest lists of approved components for the individual plants.
We created an easy set-up guide for the vacuum generator OVEM:
List of approved components for Volvo Powertrain Sweden
The list of approved components for all Volvo Powertrain Sweden projects with links to documentation, CAD data and other information from the Festo catalogue can be found here.
The list of approved components is valid for all Volvo Powertrain Sweden projects and includes all Festo products approved for use at the Volvo Powertrain plants in Sweden.