Replacing the belt reversal of the toothed belt axis ELGC. This tutorial explains, how you dismantle the old belt reversal and subsequently mount a new belt reversal. This video shows the instructions at following products as an example: Toothed belt axis ELGC-TB-KF-60-200, part number 8062776.
00:10 Dismantling the belt reversal
01:11 Mounting the belt reversal
Replacing the cover strip of the axis ELGC. This tutorial explains, how you dismantle the old cover strip and subsequently mount a new cover strip. This video shows the instructions at following products as an example: Toothed belt axis ELGC-TB-KF-60-200, part number 8062776.
00:10 Dismantling the cover strip
01:11 Mounting the cover strip
Replacing the toothed belt of the electric drive EGC-TB (-HD – this tutorial explains how it's done.
Commission, configure, convert or repair Festo products quickly and easily with videos from service2see.
Chapters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
00:55 Remove the clamping component
02:50 Remove the drive cover
03:48 Replace the toothed belt
05:11 Assemble the clamping component
08:08 Reinstall the drive cover
09:38 Reinstall the clamping component
10:49 Check pre-tensioning of the toothed belt
Mounting the motor on Festo axis ELGA – this tutorial explains how it's done.
Mount your Festo products quickly and easily with videos from service2see!
Chapters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
00:45 Mount coupling
03:51 Assemble axial kit and gear unit
05:29 Mount motor
Replacing the toothed belt of the electric drive ELGA-TB – this tutorial explains how it's done.
Commission, configure, convert or repair Festo products quickly and easily with videos from service2see.
Chapters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
00:55 Remove cover strip
02:58 Remove the clamping component.
05:17 Remove the drive cover.
06:13 Replace the toothed belt.
07:43 Assemble the clamping component.
10:24 Reinstall the drive cover.
10:37 Reinstall the clamping component.
13:10 Check pre-tensioning of the toothed belt.
14:32 Fit cover strip
Replacing the cover strip of the cantilever axis ELCC. This tutorial explains, how you dismantle the old cover strip and subsequently mount a new cover strip. This video shows the instructions at following products as an example: Cantilever axis ELCC-TB-KF-70-200-0H-P9-CR, part number 8060572.
00:11 Dismantling the cover strip
01:28 Mounting the cover strip
Replacing the roller and toothed belt pulley modules of the cantilever axis ELCC. This tutorial explains, how you first remove the old toothed belt to dismantle the roller and toothed belt pulley modules. Subsequently the video explains how you mount the new roller and toothed belt pulley modules, further mount the toothed belt and tension it. This video shows the instructions at following products as an example: Cantilever axis ELCC-TB-KF-70-200-0H-P9-CR, part number 8060572.
00:11 Removing the toothed belt
02:02 Dismantling the roller and toothed belt pulley modules
03:09 Mounting the roller and toothed belt pulley modules
05:55 Mounting the toothed belt
09:01 Tensioning the toothed belt
Replacing the toothed belt of the cantilever axis ELCC. This tutorial explains, how you remove the old toothed belt, mount a new toothed belt and subsequently how to tension it. This video shows the instructions at following products as an example: Cantilever axis ELCC-TB-KF-70-200-0H-P9-CR, part number 8060572.
00:11 Removing the toothed belt
02:07 Mounting the toothed belt
05:09 Tensioning the toothed belt