The FESS Portal is a web-based platform and a mobile app for the on-site capture of compressed air energy efficiency measures and for the quantification of energy losses, costs, and savings in real time.

了解更多

With our FPosCR application software library, different motion and robotics solutions can be created quickly and safely.

了解更多

IoT basiertes Instandhaltungssystem für Servo Schweißzangen;

了解更多

The Festo Learning Experience (LX) for Industry is our all-in-one plattform solution for digital learning with access to all contents, features and the AI supported authoring tool - for your perfect Learning Experience from small to large enterprises. 

了解更多

FluidSIM 365 is an application for creating and simulating electrical and electronic, pneumatic and hydraulic circuits. Valuable technical skills are learned by designing circuits and simulating them interactively. FluidSIM 365 licenses can be used for FluidSIM on Windows, in the browser and in Festo LX. 

了解更多

Avoid machine downtimes due to component failure with continuous AI-based cylinder monitoring. Our AX Motion Insights Pneumatic industrial app makes it easy to get started with condition-based maintenance of pneumatic components: Thanks to standardized AI models and a user-friendly UI, commissioning is done with just a few mouse clicks. Start your AI journey now!

了解更多

The IOT gateway software Festo AX Data Access retrieves data from Festo components and makes it available via MQTT. It is the simple way to set up data-driven solutions with data from Festo components, e.g. for energy or condition monitoring.

了解更多

Digitally regulate the flow rate of compressed air and gases up to 600 l/min – for several independent channels at the same time. For precise metering, simply combine the integrated sensors with external flow sensors. This saves energy and costly gases.

了解更多

The software license Motion & Robotic for the controller CPX-E-CEC-M1-xx offers a comfortable solution to creating handlings applications.

了解更多

The software license Motion & Robotik for the controller CPX-E-CEC-M1-xx offers a comfortable solution to creating handlings applications.

了解更多

FluidDraw 让您能快捷创建气动、液压和电气回路图。该软件便于创建整座工厂的回路文档，也可创建简单的回路图。

了解更多

通过设定多个压力水平节省能源。简单地将所选运动所需的压力重新设为任一更低的水平。另外，通过节流阀设置可以控制速度。

了解更多

Position freely over the entire working stroke and control the cylinder movement using limit values for the speed, acceleration and jerk parameters. Gentle positioning is possible by specifying the limit values. For selected series up to strokes of 300 mm.

了解更多

调试快速便捷，运行稳定：只需要输入前进和回程的行程时间。通过调整排气节流功能来学习和保持行驶时间。受到影响时（例如磨损导致摩擦增加）系统会自动调整数值。

了解更多

减少运营成本：根据负载以所需的最低压力运行执行元件。运动结束时，驱动室内的压力不会继续提高。因此能够节省最多 70% 的能量。对于一个负载为 2 kg 的 DSBC32-100 而言，每年可节约 100 欧元。

了解更多

使用“图示解决方案（Schematic Solution）”，只需要几分钟，便可根据阀岛的具体配置，创建出完整的Eplan项目！节省时间并获得确定性：为您的具体Festo阀岛下载完整的Eplan项目。

了解更多

通过预防性的维护和快速的错误分配来减少设备停机：通过独立的诊断循环和预定义的阈值可以在由 Festo 数字控制终端运行的应用程序中单独检测和定位泄露部位。

了解更多

周期最多可缩短 70%！利用“气缸末端缓冲功能”，无需耐磨缓冲器即可实现高动态且轻柔的定位运动。这样可以减少维护时间、延长系统使用寿命并从而提高生产效率。

了解更多

通过模型化调节，不再需要外部传感器。前瞻性的控制系统通过保存少量系统边界参数（例如气管长度、直径和气缸尺寸）来确保最高精度，因为在该应用程序中可通过控制技术补偿气管中的压降和体积。

了解更多

节省空间和硬件成本：将两个互不影响的独立式比例压力控制阀整合为单个阀 - 也可以使用真空！

了解更多

Festo Positioning Basic Library 为 Festo 处理系统的调试和定位提供了基础功能。

了解更多